Bradley Model 740 Series Fixed Tilt Mirror
- Fixed Tilt Mirror
- Welded Corners
- Satin finish Stainless Steel frame
- Frame projects: 4" at top, Tapers to 1" at bottom
FRAME: 20 gauge stainless steel, corners welded and ground smooth to satin finish. 20 gauge angle stiffeners welded to frame provide additional rigidity.
BACK: galvanized steel, secured to frame with con cealed screws equipped with integral horizontal hanging brackets.
MIRROR: first quality ¼" float glass triple-silver-plated with electro-copper-plated layer and thermosetting infrared-cured paint backing with Poly-Glaze protective finish. Manufactured in accordance with ASTM C 1036.
WALL HANGER: 18 gauge cold-rolled steel, all welded construction to form rigid template.
Verify all rough-in dimensions prior to installation. Secure concealed mounting bracket to wall with screws (not included) at holes provided. Provide in-wall backing at mounting screw locations. Position mirror over mounting bracket to engage hanger tabs. Slide mirror down and lock into position.
Fixed tilt mirror shall be framed with 20 gauge stainless steel with 20 gauge concealed
stiffeners. Welded corners shall be polished to a uniform satin finish. Mirror shall be of
first quality ¼" float glass guaranteed for 15 years against silver spoilage and protected
by a shock-absorbing, waterproof foam filler with Poly-Glaze protective fi nish. Back of
unit shall be galvanized steel secured to frame with concealed screws, equipped with
integral horizontal hanging brackets and separate wall hanger for concealed mounting.
Click to Enlarge
