Bradley Model 780 Series Mirror
- Satin finish Stainless Steel
- Angle frame
- Welded Corners
- Theft Resistant Mounting
FRAME: one-piece roll-formed stain less steel, ¾" x ¾" angle with corners welded, ground and polished smooth to a satin finish. Double strength continuous integral stiffener on all sides for added strength. Bevel on front of angle secures frame flush against mirror.
BACK: galvanized steel, secured to frame with concealed screws, equipped with integral horizontal hanging brackets.
MIRROR: first quality ¼" float glass, triple-silver-plated with electro-copper-plated layer and thermosetting infrared cured-paint backing with Poly-Glaze protective finish. Manufactured in accordance with ASTM C 1036. All edges protected by shockabsorbing, neoprene tubing.
WALL HANGER: 18 gauge cold rolled steel, all welded construction to form rigid template.
Verify all rough-in dimensions prior to installation. Secure concealed mounting bracket to wall with screws (not included) at holes provided. Mounting kits available through Bradley (ref. #899-026). For more information, visit bradleycorp.com. Provide in-wall backing at mounting screw locations. Position mirror over mounting bracket to engage hanger tabs. Slide mirror down and lock into position.
Mirror shall be framed with heavy gauge, one-piece roll-formed ¾" x ¾" stainless steel angle with double strength continuous integral stiffener. Welded corners shall be polished to a uniform satin finish. Mirror shall be of first quality ¼" float glass guaranteed for 15 years against silver spoilage and protected by a shock-absorbing, neoprene tubing with Poly-Glaze protective fi nish. Back of unit shall be galvanized steel secure to frame with concealed screws, equipped with integral horizontal hanging brackets and separate wall hanger for concealed mounting.
Click to Enlarge
